P.N.: ZCAT-1002


Technical parameter

1. Dimension: 1500x1000x1800mm

2. Working temperature: -40℃~50℃

Product description

The trainer displays the basic principles and structures of electronically controlled diesel engine, and simulates its operation.

Product composition

Diesel engine assembly	1PCS
ECU	1PCS
Dashboard	1PCS
Fault insert module	1PCS
Battery	1PCS
Training panel with circuit schematic	1PCS
OBD diagnostics seat	1PCS
Related accessaries for starting engine	1PCS
Mobile stand	1PCS

Main Features

1. This trainer can simulate normal engine operation, ie. starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, etc.

2. Equipped with fault simulation systems can simulate multiple failures in the real engine.

3. Equipped with voltmeter to show the real-time change of the sensors and actuators

4. Equipped with LED light to simulate the status of the injecting system.

5. Equipped with diagnosis seat which can use a scanner to read the fault codes and data flow of the engine control system through the diagnosis seat.

6. The training panel is printed with the color circuit schematics which makes the students can understand and analyzing the engine control system directly.

7. There are test terminals mounted on the training panel, electrical signal, such as the resistance, voltage, current, frequency, waveform of the sensors, actuators can be measured by multimeter or oscilloscope through the test terminals.

8. Equipped with power switch, tank guard, flywheel and other rotating parts shields to protect the students and teachers.

9. Equipped with fault setting module: manual fault set module. 

Training courses

1. Function introduction of main components of electronically controlled diesel engine;

2. Demonstration of engine running, starting, accelerating etc;

3. Measurement of the signals of the sensors and actuators by multimeter or oscilloscope;

4. Read fault code, data stream and remove faults through the scanner;

5. Fault set and troubleshooting.

Suitable car or engine models listed below: 

P.N.	Car model
GTAT-1002-001	Bora TDI
GTAT-1002-002	Great wall 2.8TC (High pressure common rail)
GTAT-1002-002A	Great wall 4D20 CRDI diesel engine 2.0 L
GTAT-1002-003	Isuzu 2.8TC(High pressure common rail)
GTAT-1002-004	Jetta SDI